It is the use of tides or wind to deliver our daily energy needs that form ‘Green Energy’. When ‘Green’, they are all thought to be replenishable and natural. It’s interesting to note that in some instances we’re actually travelling back in time to utilise some of the older energy skill sets e.g. Wind Power (Windmills etc.) Overall, this is the method of using modern techniques to provide eco-efficiency and planet friendly options.
It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Biomass Energy is the next phase, and this involves Fuel, Pellets, Stoves and Boilers burning Wood. Of course, then there is the heating from the Sun – often just called Ground Source Heat Pumps. When we think about Wind Power and Hydropower we have two of the more common forms of energy generation.
Thermal Energy Systems: This technology is based around two core types of system. Firstly, there are elements that absorb energy from the sun and create hot water – known as Solar Water Heating Collectors. Added to this is the generation of electricity from solar radiation – known as Photovoltaism, or more commonly Solar Electrical panels. To get the best results these panels need to be south facing at an angle of around 30 degrees from horizontal, and away from blockages.
Within Solar Energy overall, Solar Water Power is most commonly used in the UK. With the capacity to deliver 50 percent plus of a household’s hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. Typically, to fit this type of equipment will cost between 500 and 1500 pounds for a DIY kit – all the way up to 2-5k for a full professional fitting.
Biomass Energy Systems – Including all natural energy forms derived from plant and animal products – such as wood, straw, poultry litter and ‘energy crops’. It is extremely useful – in that it can produce a range of power sources, including heat and electricity. Indeed, within the European Markets, the UK has some of the leading levels of Biomass material at hand. Considering all this, and the relative lack of C02 produced, makes the whole process highly green overall. Because the system often involves one tree being planted as another is felled, many wood crops are deemed to be sustainable sources.
Within this field is the need for the use of ‘Energy Crops’, such as fast growing trees, e.g. Willow and Poplar or other entities grown on a Short Rotation Coppice (SRC). Of equal importance is the production of perennial grasses – because of their yield of dry matter. Other less known materials within this field are Agricultural and Municipal Waste. To begin with, Agricultural Waste is often produced as part of the agricultural process overall. Municipal Waste such as food or wood can also be utilised as a biomass product.
Systems Based On Geo-Thermal Energy: By naturally heating the Earth, the Sun has the potential to generate both warm water and electricity. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. These heat pumps do need some power to operate; but for every one unit of energy they use, they generate four units of energy in return. This system can go even further – if energy efficient items such as wind turbines or solar electrical panels are used.
Wind Energy: As an energy source, wind energy has to be one of the oldest forms of energy creation in history. That aside, the ability to generate energy and both transfer this into the home or the local grid has been a relatively new option. With regard to wind generation, it is the UK that has the highest production within Europe. For the fact remains that, within the UK, we have the ability to generate 10 percent of our requirement from Wind Production – as opposed to the current value of only 1 percent. Electricity can be produced from as little as 2p per kWh, but generally comes in somewhere between 2-10p per kWh. The financial recovery process takes around 6-9 months.
Finally, we have Hydropower; an area in which the UK does well within Europe. The ability to utilise energy from moving water, much like wind power, has been going on for thousands of years. It is this type of energy production that could meet 2 percent of all the UK’s demand.
Using a turbine, a Hydropower system can transform the energy of water into other forms. No water reservoirs are required – as the turbines either run through a water drop-off system or the natural power of the river. It is by using the eroded national distribution systems, that allows for outdated sluices and dams to be used by techniques known as ‘Micro-Hydro’. Having said that, this process could still generate 200mW of the National Capacity. When considering the installation cost of items such as this, we’re looking at somewhere between 200 pounds and 3k per kW of energy created.
Because of the energy need of the Western World, we are now seeing a rapid rise in ‘Green Energy’. The UK is very well placed to provide most of the schemes set out above, and the UK domestic market again is one of the key beneficiaries of this technology.
It is the drive for installations in the domestic sector that looks to favour jobs such as plumbers and electricians. With EEC and UK recognition of renewable energy getting ever-higher on the political agenda, the grants and financial aid for introduction of these systems can only increase. It is by gaining the right certificates that will provide opportunities and job security for the long term. Look for combined electrical and plumbing training, with a key emphasis on practical green systems and installation.
(C) Scott Edwards 2009. Pop over to Green Engineer Certification or CLICK HERE.
{ 0 comments… add one now }